Truck Stud & Hub Cleaning Tool - MSH-C2

MSH-C2 Checkpoint Truck Stud and Hub Cleaning Tool

The MSH-C2 Checkpoint Truck Stud and Hub Cleaning Tool is the toughest 2-in-1 cleaning device for medium and heavy trucks on the market. Built with heavy-duty stainless-steel brushes and a long-lasting abrasive pad, it quickly removes rust, corrosion and dirt from studs, hubs, drum brakes and rotors. This ensures the secure fitment of wheels and wheel nuts, helping to minimise the risk of wheel detachment.

Designed as a durable one-piece tool with no replacement parts, it cleans up to 300 truck hubs without damaging the surface. Compatible with a 1/2" impact wrench, the tool is simple to use: rotate clockwise onto the stud and counterclockwise off, with no need for excessive force.

MSH-C2 Checkpoint Stud and Hub Cleaning Tool - Black & Violet is impact-wrench rated, with a torque capacity up to 949 Nm and stud compatibility up to M22. The distinctive black and violet design makes it easy to identify in any workshop.

Key Features

• 2-in-1 cleaning tool: removes rust, corrosion and dirt from studs, hubs, drum brakes and rotors.
• Heavy-duty design: stainless-steel brushes and an abrasive pad for powerful, long-lasting performance.
• No replacement parts: one-piece construction ensures nothing falls off during use.
• Secure wheel fitment: prevents off-centre hub issues, vibrations and premature wear.
• Impact-wrench compatible: works with a 1/2" impact wrench for fast, efficient cleaning.
• Long lifespan: cleans up to 300 truck hubs without damaging surfaces.

Specifications and Dimensions

• Drive size: 1/2"
• Maximum torque: 949 Nm (700 ft-lb)
• Impact wrench rated: Yes
• Maximum stud length: 146 mm (5 3/4")
• Maximum stud diameter: M22 (7/8")
• Diameter: 62 mm (2 7/16")
• Air pressure – max. inlet: 90 psi (6.2 bar)
• Colour: Black & Violet
• Product dimensions (L×W×H): 6.3 × 6.3 × 13.2 cm (2 1/2 × 2 1/2 × 5 1/8")

Application Guidelines

Use the MSH-C2 Checkpoint Truck Stud and Hub Cleaning Tool to clean all studs and hubs before wheel fitting. Rotate clockwise onto the stud and counterclockwise off the stud - no pushing or pulling is required. Do not use with tools that exceed the RPM shown on the label, and only spin under load. Ensure compressed air sources are fitted with the correct filter to avoid water or oil contamination.

Regular cleaning prevents build-up of rust and debris so wheels tighten properly, reducing the risk of loosening while driving and helping avoid vibrations and accelerated wear.