Rockfall Arc Safety Boot
Exc. VAT
The Arc is an advanced safety boot designed for electrical hazard protection. Tested to IEC 61482-1-1:2019 standards for thermal hazards from electric arcs, it offers exceptional protection with fire-resistant laces, Helcor® upper materials, and R-TEN™ stitching. It achieved a material ATPV rating of 126Cal/cm² and no burns at 109.4Cal/cm².
Ideal for harsh environments, the boot features a Sympatex® waterproof membrane, withstanding 100 hours of testing. It’s certified to handle 18kV electrical risks, has a 100% non-metallic construction, and features a fibreglass toecap, composite midsole, and a FORCE10® outsole for abrasion resistance and shock absorption. The Activ-Step® Comfort Footbed ensures all-day breathability and comfort.
Specification:
EN ISO 20345:2011 SB P CI E FO WRU HRO WR SRC
AS/NZ 2210.3:2019 SB P CI E FO WRU HRO WR SRC
ASTM F 2413-18 M/I/C EH PR
Upper Material: LWG certified water repellent cow full grain leather
Webbing and Trims: Helcor® full grain leather heel counter
Laces: Fire retardant polyester
Footbed: Activ-Step® 82% pre consumer recycled foam and 100% post consumer recycled top mesh
Membrane: Moisture-tech by Sympatex®
Scuff Cap: FORCE10® 59% Bio TPU
Outsole: FORCE10® dual density PU and nitrile rubber
Digging Plate: Impact Shield™
Protective Toecap: Fibreglass
Protective Midsole: Activ-Step® Aramid Fibre
This footwear is Electrical Hazard and tested in accordance with the test method as set out within ASTM F2412-18. This protection deteriorates rapidly in humid, damp and wet environments and with wear. Electrical Hazard (EH) Safety footwear is intended as secondary source protection equipment and not for live working. This boot has been independently tested in accordance to the IEC 61482-1-1:2019 arc test methods. The results achieved are not an official rating or standard and the conclusions are not covered by the ENAC accreditation scope. The project ATPV rating for the material is 126 Cal/cm² and project rating for whole footwear was No Burns observed at 109.4 Cal/cm². Laces to the same specification from the manufacturer should be used as replacements.